Official Beer Die Table Dimensions-Make a perfect Beer Die Table

If you are not familiar with the beer die table dimensions, you should read this article. Beer die is a popular drinking game also known as snappa or beer dye. The standard-size beer die table measures 8 feet in length and 4 feet in width. The table height can vary but is typically around 3 feet tall like a carpetball table but the measurements of carpetball table are different.

Beer dye tables contain cup holders or scoring areas to fulfill the objective of the game. These tables are commonly found at parties, college campuses, and other social gatherings where drinking games are played. 

To help you in creating the ideal table for yourself, this post will give you in-depth information. Surely, by the end of this article, you’ll be able to create your own table, like in previous sports articles.

So, let’s learn in detail!

Beer Die Table Dimensions
Beer Die Table Dimensions

Beer Die Table Dimensions and Measurements

Here are some beer die table measurements that you should know before building your own table and starting the game.

Beer Die Table Dimensions
Beer Die Table Dimensions
  • The game is played on a plywood sheet measuring 8 by 4 feet.
  • The sheet thickness should measure 1/2 inch (13 mm).
  • The standard width of the beer die is 4 feet.
  • The dye table height should be 3 feet.
  • The game uses a solo cup that measures 4.75 inches in height and 3.75 inches in diameter.
  • The standard dice, known as the bicycle die, used to play the game measure 5/8 inch (16 mm).
  • A cup full of water or beer is to be placed 8 inches from the back and 5 inches from the side.
  • Cups for teammates’ cups must be located 3.5 feet apart.
  • Opponents’ cups must be positioned 7.5 feet apart.

How Big Should a Beer Die Table Be?

Key ElementsBeer Die Table Dimensions
Playing SurfacePlywood
Length8 feet (2.4 meters)
Width4 feet (1.2 meters)
HeightVaries, but usually 3 feet tall
Plywood ThicknessHalf-inch (1.27 cm)
Cup Diameter3.75 inches (9.5 cm)
Dice Diameter5/8 inch (1.6 cm)
Placement of the cup5 inches (13 cm) from the side and 8 inches (20 cm) from the back

How Thick Should a Beer Die Table Be?

To play beer dye, you need a plain half-inch-thick piece of plywood. Typically, a table’s edge thickness measures between 2.5 and 3.8 cm and 1 and 1.5 inches. During gameplay, a thicker edge helps prevent dice from falling off the table.

Beer Die Table Dimensions
Beer Die Table Dimensions

What is a Beer Table Made Of?

A beer-dye table has a flat surface that provides a suitable playing area for the game. Usually, tables are made of wood or high-density plastic. The half-inch-thick plywood should be painted and stained. The protective coating on tables protects them from water damage.

Tables with folding legs that are convenient to transport and store. Typically, polyethylene and other similar materials are used in plastic tables.

For the legs of the table, a pair of sawhorses can be used. It is recommended to choose sawhorses with adjustable heights for convenience. The plywood and sawhorses can be combined to make a functional beer die table.


The table height can vary but is usually around 3 feet tall.

Some of the research shows that the game was invented at Colby around 1972. Colby is the place where the game of beer die is played the most.

The Sumerians are credited with having invented beer in approximately 8,000 BC.

An official-size beer die table measures 8 feet in length and 4 feet in width.


You can find enough information about regulation beer die table dimensions in this article. We focused on the standard measurements as well as the materials used to create the table for the game. An official die table measures 8 feet long and 4 feet wide, with a standard height of around 3 feet. Plywood that is at least 1/2 inch thick often serves as the playing surface.

Just assuming this article provides readers with the necessary information to create their own beer die table.

Leave a Reply

Your email address will not be published. Required fields are marked *